Engine Case Services

004-RMS-SHIPT1	SHIPPING Fee - T-1 CASE	$0.00

004-RMS-SHIPT4	SHIPPING Fee - T-4 CASE	$0.00

004-CMS-1	Clean Engine Case - T-1 / T4	$60.00

004-CMS-2	Remove Head Studs from T-4 Case	$60.00

004-CMS-3	Remove Head Studs from T-1 Case	$40.00

004-CMS-4	Install Dipstick in T-4 Case	$60.00

004-CMS-5	Bore T-1 Case For T-3 Dipstick	$60.00

004-CMS-6	Bore T-4 Case Oil Filler Hole	$60.00

004-CMS-7	Drill and Tap Case For Full Flow	$35.00

004-CMS-8	Drill Tap Oil Galley Holes in T-1 Case	$80.00

004-CMS-9	Drill Tap Oil Galley in Holes T-4 Case	$80.00

004-CMS-10	Install 10mm Inserts in T-4 Case	$100.00

004-CMS-11	Install Case Savers in T-1 Case	$85.00

004-CMS-12	Convert T-1 Case from 8mm to 10mm	$100.00

004-CMS-13	Deck Case - T-1 / T-4	$85.00

004-CMS-14	Bore T-4 Case for 1/2" through-bolts	$100.00

004-CMS-15	Lower Lifter Bosses in T-1 Case	$60.00

004-CMS-16	Sleeve Lifter Bores in T-1 Case	$130.00

004-CMS-17	Sleeve Lifter Bores in T-4 Case	$130.00

004-CMS-18	Shuffle Pin Center Main in T-1 Case	$75.00

004-CMS-19	Shuffle Pin all Mains in T-1 Case	$175.00

004-CMS-20	Shuffle Pin all Mains in T-4 Case	$200.00

004-CMS-21	Clearance T-2 Case For Stroker Crank	$85.00

004-CMS-22	Cut T-1 Case for Flange Crank	$60.00

004-CMS-23	Align Bore T-1 Case	$85.00

004-CMS-24	Align Bore T-4 Case	$85.00

004-CMS-25	Bore T-1 Case to 85.5mm	$80.00

004-CMS-26	Bore T-1 Case to 90.5/92mm	$80.00

004-CMS-27	Bore T-1 Case to 94mm	$80.00

004-CMS-28	Bore T-4 Case to 103/105mm	$90.00

004-CMS-29	Weld Plate Behind Cylinder #3	$120.00

004-CMS-30	Machine T-1 Case for Flex Plate	$75.00

004-CMS-31	Repair Main Dowel Pin	$60.00